![]() You can also control a projector using the controls on the visualizer by connecting the projector to the visualizer using a 6-pin to 9-pin rs232 cable. P.Ĩ connect the projector port to the projector’s rgb in port using the rgb cable. ![]() Making connections: before making any connections, turn off all the power. Open the arm lights and rotate the camera head until they are properly positioned. ![]() Place one hand firmly on the base of the visualizer, while carefully lifting up the camera stand using the other hand. 23 parts.Ĥ mem (multiple screen display, the stored images will be displayed in a 4 x 4 matrix) ppw (control the projector on/standby) pin (projector input signal selection) / (move the image up/down) power (control the visualizer on/off) ccd/pc1/pc2 (ccd/rgb input signal selection) s-video/video (s-video/ v.ĥ remote control power (control the visualizer on/off) save (save captured images) recall (multiple screen display) lamp (control the arm lights and back light) rotate (rotate the image) freeze (freeze the image) neg (display film negatives) mirror (v-reverse the image) xga (switch between xga (1024.Ħ tele/ w ide (increase and decrease magnification) far/near (focus near or far) auto (to auto adjust brightness, auto white balance and auto focus) ccd/pc1/pc2 (ccd/rgb input signal selection) s-video/video (s-video/ video input signal selection) volume+/- (increase or decrease the volume) red+/- (.ħ 1. Do not use the unit continuously for more than 24 hours with camera auto fo.Ģ contents: parts identification. Refer to qualified personnel for service only. ![]() To prevent electrical shock, do not open the cabinet. 1 precautions please follow these precautions: to prevent fire or shock hazard, do not expose the unit to rain or moisture. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |